background image

AXDSPL-GM30

I N S T A L L A T I O N   I N S T R U C T I O N S

AxxessInterfaces.com 

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION 

REV. 11/2/20 INSTAXDSPL-GM30

Google Play Store

Apple App Store

iOS 12.1 or higher

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun, 
  solder, and heat shrink • Tape • Wire cutter
• Zip ties • Multimeter

TABLE OF CONTENTS

Installation Options ...............................................2
Installation .............................................................2
Connections ........................................................ 3-4
AXDSPL-BT Installation...........................................5
AXDSPL-SP Installation...........................................6 

Mobile App .........................................................7-15
Specifications ....................................................... 16

GM

 DSP Interface With Pre-Wired Harness 

2019-Up

•  Includes a DSP (Digital Signal Processor)
•  15 Band graphic EQ
•  4 inputs and 6 individually assignable outputs
•  Independent equalization for front, rear, and sub
•  Selectable low pass, band pass, and high pass filters
•  Selectable crossover slopes; 12db, 24db, 36db, 48db
•  Each channel can be delayed independently up to 10ms
•  Clipping detection and limiting circuits
•  Retains factory parking sensor chimes
•  Retains OnStar® voice prompts
•  Adjustable chime level
•  Designed for non-amplified models
•  Easy behind the radio installation with pre-wired harness
•  Internal header port for adding interface modules
•  Bass knob included for level control of subwoofer amp
•  Settings adjusted via Bluetooth

®

 in a smart device application (tablet 

or mobile phone), compatible with both Android and Apple devices

•  Read, write, and store configurations for future recall
•  Password protect feature available in the mobile app
•  Micro-B USB updatable

• AXDSPL-GM30 interface
• AXDSPL-GM30 interface harness
• AXDSPL-GM30 vehicle T-harness • Bass knob

APPLICATIONS

Visit axxessinterfaces.com for current application list

Summary of Contents for AXDSPL-GM30

















Reviews: