Keyless Entry And Alarm System
DOC
:
1.04
TL
April 12, 2006
Manufactured in Canada
User Guide
Table of Contents
Introduction ....................................1
One-Way Transmitter
Functionalities ................................2
Transmitter Operation ....................2
Two-Way Transmitter Functions at
a Glance.........................................3
LCD Transmitter Operation ............3
Basic Vehicle Operation.................3
Transmitter Mode Selection ...........3
Parking Countdown........................4
Time or Alarm Clock Adjustments..4
Features Available on your System5
Relock doors ..................................5
Panic Mode ....................................5
Multi-car Operation.........................5
Temporary Chirp Delete.................5
Priority Door Access ......................6
Alarm Functions.............................6
Passive Arm Mode.........................6
Active Arm Mode ...........................6
Disarming and Unlocking Doors.....6
Starter Disable ...............................6
To Arm the Starter Disable ............6
To Disarm the Starter Disable........6
Retain Accessory Output ...............7
System L.E.D. Flash Rate..............7
Valet Operation..............................7
Remote Valet Operation ................7
Parking Lights Flash Rate..............8
Introduction
Congratulations on the purchase of your new alarm system by Autostart! Whether you have chosen a 1-way
system or a 2-Way system, you can now have the peace of mind of knowing that your prized possession is now
protected by a sophisticated, state of the art alarm system. Packed with many advanced features, this system
will satisfy any one of your expectations of high-end commodity and security, without neglecting any standard
feature commonly offered by entry-level systems. Please read carefully this user guide to get acquainted with
the operation and the features of your alarm system. Some features require extra parts and installation labour,
please contact your installation centre for more details.
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication.
FCC USER NOTICE (U.S.A.):
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user's
authority to operate the equipment.
