set current time
The clock setting buttons (T1 and T2)
are pen push — use the tip of a ballpoint
pen to press the recessed button.
HOUR
:
1. Press T1 button once (located right
of the LCD clock) to cause the hour
indicator to blink.
2. Press and release (or hold down) T2
button to advance to the desired hour.
MINUTE:
1. Press T1 again for the minute indicator
to blink.
2. Press and release (or hold down) T2 to
advance the minute indicator to the
desired time.
DAY:
1. Press T1 again to cause the day
indicator to blink.
2. Press and release (or hold down) T2 to
advance to the desired day.
12 or 24 HOUR:
1. Press T1 again to cause the 12 hour
indicator to blink.
2. Press T2 to toggle to desired 12 or 24
hour clock settings.
3. Press T1 again to end time setting/
editing procedure.
record messages
1. Press and release RECORD button.
This causes the blue LED to turn on.
a. The blue LED will turn off if a
message button is not pushed
within 5 seconds.
2. Press and hold any of the 5 message
buttons (located above the speaker).
The five message buttons are pen
push — use the tip of a ballpoint pen
to press the recessed button.
a. While recording, the LCD will
display a countdown of remaining
recording seconds. Each of the five
messages holds up to 12 seconds.
b. During the recording of messages
the blue LED will turn off.
3. Begin recording desired message.
4. Release message button when
recording is complete.
playback
Press and hold the message button
for the length of the message.
replay button
Replay button will replay the
last message within 25 seconds after
the message plays.
set automatic playback
1. Press and release TIME button. This
causes two fields to blink. Both are
located on the left side of the LCD.
Attainment’s
instructions
Voice Cue
Auditory Cueing – Verbal Prompting
5 messages
