- 1 -
■
Important specifications
Max. Pressure
０．６８
ＭＰａ
/
６．
８
b a r /
９８
ＰＳＩ
Noise level
７１．５ｄ
Ｂ
（
Ａ）
Spray condition
Recommended
Measuring point
1m backwards from gun , 1.6
ｍ
height
Spray Gun with Agitator Cup
W-101A
Be sure to observe warnings and cautions in this instruction manual.
If not, it can cause paint ejection and serious bodily injury by drawing organic solvent.
Be sure to observe following
marked items which are especially important.
Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or loss of life.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or property
damage.
Indicates notes which we ask you to observe. The safety precautions in this instruction manual are the minimum
necessary conditions. Follow national and local regulations regarding fire prevention, electricity and safety as well as
your own company regulations.
■
Main specifications
Model
Type of
feed
Nozzle
orifice
φ
mm(in)
Air cap
set
※
1 Atomizing
air pressure
bar (PSI)
Fluid
output
ml/min
Air
consumption
l/min(cfm)
Pattern
Width
mm(in)
Air & fluid
Connection
Weight
g(lbs)
Remarks
W-101A-104G
1.0 (0.039)
90
165(6.5)
W-101A-134G
Gravity
110
180(7.1)
695(1.53)
W-101A-134S Suction
1.3 (0.051)
W-101
H4
1.5 (21)
100
180 (6.4)
170(6.7)
(Air)G1/4(NPS1/4)
(Fluid)G1/4(NPS1/4)
775(1.71)
With
agitator
cup
※
1. Atomizing air pressure means air pressure at gun inlet when trigger is pulled and air flows
．
※
2. Tested with 12 sec./NK-2 automotive repair paint
■
Parts List
№
Description
Q’ty
№
Description
Q’ty
1
Air cap set
1
20
Tube
1
2
Fluid nozzle-fluid
needle set
1
21
Air motor lid set
1
2-1
Fluid nozzle
1
22
Container (for suction feed)
or cup (for gravity feed)
1
2-2
Fluid needle set
1
23
Fluid adj. set
1
25
Needle packing set
1
24
Air adj. set for air motor
1
5
Body set
1
5-1
Air nipple
1
5-2
Fluid nipple
1
6
Pattern adj. set
1
6-1 Stopper
1
6-2 Washer
1
6-3 Back ring
1
7
Air valve seat set
1
7-1
O ring
1
8
Air valve
1
9
Air valve spring
1
11
Fluid needle spring
1
13
Air valve shaft
1
14
Air adj. set
1
15
Trigger stud
1
16
Trigger
1
17
E stopper
1
18
Brush
1
19
Instruction manual
1
◆
Marked parts are wearable parts.
Max. Temperature
Atmosphere
５℃〜４０℃
Air
・
Fluid
５℃〜４３℃
◆
◆
◆
◆
◆
◆
◆
◆
INSTRUCTION MANUAL
和文取説は、裏面にあります
This manual contains IMPORTANT WARNINGS
and
INSTRUCTIONS.
Equipment in this manual is exclusively for painting purposes.
Do not use for other purposes.
The operator shall be fully conversant with the requirements stated in this
instruction manual including important warnings, cautions and operation and
correct handling.
Read and understand the instruction manual, before use and retain for
reference.
