Analogic bk ultrasound bkSpecto, Процедура установки

Страница: 1 / 16

Installation Procedure for bkSpecto
IG42955-03 16-01724 rev 00 1/16
Installation Procedure for bkSpecto
IMPORTANT:
This procedure must be carried out only by BK Ultrasound service personnel or their authorized
representatives. The procedure covers unpacking and set-up of the system including connecting to the
power outlet and a possible network connection.
All scanners leaving the factory are configured for mains voltage 100-240V 50/60Hz and English
language. The mains voltage does not have to be changed as the power supply accepts 100-240V
50/60Hz.
CONTENTS PAGE
1 Necessary Tools .......................................................................................................................1
2 Unpacking the System..............................................................................................................2
3 Check the fuses ........................................................................................................................3
4 Fasten the Transducer Holder Frames.....................................................................................4
5 Set-up Additional Transducer Holders (Optional – UA1371) ....................................................5
6 Set-up Side-mount basket (Optional – UA1379) ......................................................................7
7 Connectivity ..............................................................................................................................8
8 Setting Up Printer Start-up Kit (Optional – UA4104).................................................................9
9 Connect the power cord..........................................................................................................10
10 Turn On the Scanner ..............................................................................................................11
11 Electrical safety test and functional test..................................................................................11
12 Creating an User.....................................................................................................................12
13 Changing language (Optional)................................................................................................13
14 Connecting to Wi-Fi (Optional) ...............................................................................................14
15 Time and Date Settings ..........................................................................................................14
16 General information ................................................................................................................16
1 Necessary Tools
- Small thin slotted screw driver (e.g. 2mm or 3/32 in).
- Tools for electrical safety test.
- Torx #10 and #20 for printer set up.
- Torx #25 for transducer holder frame and additional transducer holders.
- Checking Procedure available in user guide.