5151 San Felipe Suite 500
Houston, TX 77056
www.goodmanmfg.com • www.amana-hac.com
©
2014 - 2016 Goodman Manufacturing Company, L.P.
I
NSTALLATION
I
NSTRUCTIONS
FOR
*MVM97 & *CVM97
M
ODULATING
G
AS
F
URNACE
IOG-2007E
9/2016
(Type FSP CATEGORY IV Direct
or Non Direct Vent Air Furnace)
These furnaces comply with requirements em-
bodied in the American National Standard / Na-
tional Standard of Canada ANSI Z21.47·CSA-2.3
Gas Fired Central Furnaces.
Installer:
Affix all manuals
adjacent to the unit.
A
s a professional installer you have an obligation to know
the product better than the customer. This includes all
safety precautions and related items.
Prior to actual installation, thoroughly familiarize yourself
with this Instruction Manual. Pay special attention to all
safety warnings. Often during installation or repair it is
possible to place yourself in a position which is more
hazardous than when the unit is in operation.
Remember, it is your responsibility to install the product
safely and to know it well enough to be able to instruct a
customer in its safe use.
Safety is a matter of common sense...a matter of thinking
before acting. Most dealers have a list of specific good
safety practices...follow them.
The precautions listed in this Installation Manual are
intended as supplemental to existing practices. However,
if there is a direct conflict between existing practices
and the content of this manual, the precautions listed
here take precedence.
RECOGNIZE THIS SYMBOL
AS A SAFETY PRECAUTION.
*
NOTE: Please contact your distributor or our website for
the applicable Specification Sheet referred to in this manual.
TABLE OF CONTENTS
is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights reserved.
Safety Considerations
3
Shipping Inspection
4
Electrostatic Discharge (ESD) Precautions
4
To The Installer
5
Product Description
5
Features
5
Product Application
6
Location Requirements & Consideratinos
7
Clearances and Accessibility
8
Existing Furnace Removal
9
Thermostat Location
9
Combustion & Ventilation Air Requirements
9
Installation Positions
12
Horizontal Applications & Considerations
13
Furnace Suspension
13
Front Cover Pressure Switch Tube Location
13
Drain Trap and Lines
13
Leveling
13
Alternate Electrical and Gas Line Connections
14
Drain Pan
14
Freeze Protection
14
Propane Gas/High Altitude Installations
14
Vent/Flue Pipe & Combustion Air Pipe
14
Dual Certification: Non-Direct/Direct Vent
15
Materials and Joining Methods
15
Proper Vent/Flue
and Combustion Air Piping Practices
15
Termination Locations
16
Special Venting Requirements For
