DA103-302 HDMI 1x2 DA
with Built-In Input Cable
User’s Guide
400-0545-003
1
Welcome!
We greatly appreciate your purchase of the DA103-302 HDMI 1x2 DA with
built-in input cable. We are sure you will find it reliable and simple to use.
Superior performance for the right price, backed by solid technical and
customer support is what Altinex has to offer.
We are committed to providing our customers with Signal Management
Solutions
®
to the most demanding audiovisual installations at competitive
pricing and we welcome you to join the ranks of our many satisfied customers
throughout the world.
1. Precautions and Safety Warnings
Please read this manual carefully before using your DA103-302. Keep this
manual handy for future reference. These safety instructions are to ensure the
long life of your DA103-302 and to prevent fire and shock hazards. Please
read them carefully and heed all warnings.
1.1 General
Qualified Altinex service personnel or their authorized representatives
must perform all service.
1.2 Installation Precautions
To prevent fire or shock, do not expose this unit to water or moisture.
Do not place the DA103-302 in direct sunlight, near heaters or
heat-radiating appliances, or near any liquid. Exposure to direct
sunlight, smoke, or steam can harm internal components.
Handle the unit carefully. Dropping or jarring can cause damage.
Do not pull any cables that are attached to the DA103-302.
1.3 Cleaning
Clean only with a dry cloth. Never use strong detergents or solvents
such as alcohol or thinner.
1.4 FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions found herein, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Any changes or modifications to the unit not expressly approved by
Altinex, Inc. could void the user’s authority to operate the equipment.
2. Installation Procedures
Step 1.
Plug the HDMI DA into the HDMI source device (HD DVD, Blu-ray, etc.) using the built-in input cable.
Step 2.
Output 1 determines the highest resolution; connect the output device with the highest resolution to Output 1 of the HDMI Splitter using HDMI
cable. (HDMI cables are optional and are typically included with the display device). Connect the second device to Output 2.
Step 3.
The DA103-302 1x2 DA receives power from the HDMI source and does not require an external power supply. Apply power to the source and
display devices. If the HDMI source does not p5VDC out, use the ex5VDC adapter provided; Altinex part number PS5508US.
Step 4.
The unit is now operational. The Signal Output LEDS on the DA103-302 turn ON and RED when connected properly, all devices are powered, and
the HD signal is present.
Note:
The DA103-302 handles DHCP keys automatically to provide proper content protection.
3. Limited Warranty/Return Policies
Please see the Altinex website at
www.altinex.com
for details on warranty and return policies.
