Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 [email protected] www.altelix.com
Copyright (C) 2017 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC.
Specifications are subject to change without notice. See
www.altelix.com
for most current information
IS0142 Rev A 10/10/19
NS242416VFA1C-R6U Enclosure
Installation Guide
Step 1:
Remove the blank access panel located on the
bottom of the enclosure.
WARNING: READ ALL INSTRUCTION BEFORE USE. THIS ENCLOSURE IS DESIGNED TO BE
INSTALLED BY A TRAINED PROFESSIONAL INSTALLER.
Access Panel
Step 2:
Position the included gasket onto the Power/Fan
module as shown. For proper seal, ensure the
holes in gasket are aligned with mounting holes in
module panel.
Step 3:
Secure
Power/Fan
module
to
enclosure using supplied hardware.
To ensure proper seal, use the nylon
washers included with hardware.
Mounting Screw
with Nylon Washer
Mounting:
For wall mounting (4) 5/16”
(8mm) diameter holes are
provided on the rear of the
enclosure.
Enclosure with
Power/Fan Module Installed
Mounting Holes
For pole mounting, optional
NMKS-S Series
pole mount
kits are available from
Altelix.
Power/Fan Module
with Gasket
