10715 Springdale Ave, Ste 4, Santa Fe Springs, CA 90670
l
Tel: 1-888-287-9228
l
Fax: 1-888-258-9183
l
E-mail: [email protected]
Installation Instructions
Alphalite LED Curved-Basket Linear Wrap Luminaire
Installation guide valid for the following models:
CBW-4L(40S2)
WARNING
RISK OF FIRE OR ELECTRIC SHOCK
The LED Curved-Basket Linear Wrap Luminaire must be installed by a qualified electrician in accordance
with applicable federal, state, and local laws and codes. Installation requires knowledge of luminaire
electrical systems and installer should be familiar with the operation of this product. If not qualified, do not
attempt installation; contact a qualified electrician. Manufacturer assumes no responsibility for the improper
installation of this luminaire. When installing the fixture, drilling may damage luminaire wiring and electrical
parts. Check for wiring and components in enclosure before drilling.
WARNING
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
When installing this kit, drilling may damage luminaire wiring and electrical parts. Check for wiring and
components in enclosure before drilling.
WARNING
RISK OF PERSONAL INJURY
Wear gloves or proper handling protection to prevent cuts or abrasions when handling and maintaining this
product. This equipment may have sharp edges. To reduce the risk of death, personal injury or property
damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warning and
instructions included with and on the fixture box and all fixture labels.
WARNING
Suitable for Damp locations. Do not touch LEDs with hands or tools. Mishandling of LED can lead to product
failure.
WARNING
RISK OF PERSONAL INJURY, FIRE OR ELECTRIC SHOCK
Turn OFF power before installation.
Contact manufacturer with any questions or concerns regarding installation of this luminaire.
1
