background image

506725-01

Page 1 of 48

Issue 1109

This is a safety alert symbol and should never be ignored.  When you see this symbol on labels or in

manuals, be alert to the potential for personal injury or death.

As with any mechanical equipment, personal injury can

result from contact with sharp sheet metal edges.  Be

careful when you handle this equipment.

  CAUTION

Manufactured By

Allied Air Enterprises, Inc.

A Lennox International, Inc. Company

215 Metropolitan Drive

West Columbia, SC 29170

Improper installation, adjustment, alteration, service or

maintenance can cause property damage, personal injury

or loss of life.  Installation and service must be performed

by a licensed professional installer (or equivalent), service

agency or the gas supplier.

  WARNING

Unit Dimensions ............................................................ 2

A95/A93/95G1/92G1DF Parts Arrangement ................. 3

A95/A93/95G1/92G1DF Gas Furnace .......................... 4

Shipping and Packing List ............................................ 4

Safety Information ......................................................... 4

Use of Furnace as a Construction Heater .................... 5

General ......................................................................... 6

Combustion, Dilution, Ventilation Air ............................. 6

Setting Equipment ........................................................ 9

Filters .......................................................................... 12

Duct System ................................................................ 12

Pipe and Fittings Specifications .................................. 12

Joint Cementing Procedure ........................................ 14

Venting Practices ........................................................ 14

TABLE OF CONTENTS

Vent Piping Guidelines ................................................ 15

Gas Piping .................................................................. 28

Electrical ..................................................................... 31

Unit Start Up ................................................................ 34

Gas Pressure Adjustment ........................................... 36

High Altitude Information............................................. 36

Other Unit Adjustments ............................................... 39

Blower Motor Performance ......................................... 40

Service ........................................................................ 42

Planned Service .......................................................... 44

Diagnostic Codes ........................................................ 44

Repair Parts List ......................................................... 45

Start Up Checklist ....................................................... 46

This manual must be left with the homeowner for future reference.

INSTALLATION INSTRUCTIONS

A95DF, A93DF, 95G1DF & 92G1DF

Warm Air Gas Furnace / Downflow Air Discharge

(P) 506725-01

*P506725-01*

Summary of Contents for 92G1DF

















































Reviews: