1
Recommended method to transfer DL-Windows Accounts
•
The recommended method is use a
USB Flash Drive
to transfer the files.
The “Import a Single ADF Account file” feature is only supported by DL-Windows version 3.5.5 and greater. This method
will assume that a USB Flash Drive is already working on the system.
Note:
DL-Windows should not be running on ei-
ther system.
Account files are in pairs.
Acctx.Adf
is the Account file and the
Acctx_Log.adf
is the Event Log for that Account. For
this example (shown in the image below), the files
Acct2.adf
and
Acct2_Log.adf
are used. Please note that some sys-
tems do not display file extensions, and you may only see
Acct2
and
Acct2_Log
--this is OK. Please proceed as if the
file extensions are shown.
On the source computer (the computer
from
which you want to transfer the Account files), open
Windows Explorer
from the
Start
,
Programs
menu. Locate the installation folder to which DL-Windows was installed (if you chose the in-
stallation defaults, it should be “C:\DL-Windows”). Highlight the Account files you wish to transfer by holding down the
“
Ctrl
” key and clicking each file with the mouse one by one. Right-click the highlighted files and select
Copy
(as shown
in the image below).
ADDENDUM
Transferring DL-Windows
Accounts
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2006
WI1564 7/06
Summary of Contents for DL-Windows Addendum
Page 4: ...4...
