background image

Document Number:

MD500-IBF-KIT-OMM/IPL

Revision:

           

B

Date:           

23 MARCH 2007

4 Research Park Drive, Suite 200 

St. Charles, MO  63304-5685

Operation & Maintenance Manual/ 

Illustrated Parts List 

INLET BARRIER FILTER SYSTEM 

for the 

MD Helicopters Inc. (MDHI) 

MD500 Series Helicopters 

 

FAA STC No.    SR01394LA 

COPYRIGHT© 2002 

Aerospace Filtration Systems, Inc. (AFS) 

UNPUBLISHED — ALL RIGHTS RESERVED 

LIMITED and/or RESTRICTED RIGHTS NOTICE 

This document, along with its drawings and photographs, contains Trade Secrets and/or Commercial 
or Financial Information that is proprietary to Aerospace Filtration Systems, Inc. (AFS) under 5 USC 
552 as amended, and is Prohibited from Public Disclosure by 18 USC 1905.  Do not duplicate or 
disclose outside the U.S. Government without the express written permission of Aerospace Filtration 
Systems, Inc. 

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these 
technical data are restricted to the purpose of evaluating AFS's design for FAA commercial 
certification and airworthiness consideration only.  Any reproduction of technical data or portions 
thereof marked with this legend, or referring to this legend, must also reproduce the markings and 
legend.  Any person, other than the Government, who has been provided access to such data must 
promptly notify:  Aerospace Filtration Systems, Inc., Attn:  Business Manager, 4 Research Park Drive, 
St. Charles, MO  63304-5685 

The data subject to this limited/restricted rights notice is contained on all pages.

Summary of Contents for MD500 Series






























Reviews: