Operating Manual for
APBT20
0
Thanks for purchasing the
APBT200
. Please read this operating manual carefully
before using in order to ensure correct use of proper functions!
1. Introduction to the Product
This product is a Bluetooth handsfree car kit, car charger and music player, It has a
built-‐in MP3 decoder chip that can transmit music files inside the USB disk to your car
stereo wirelessly via bluetooth, and can switch an incoming call to the handsfree state
as long as your mobile phone is provided with the Bluetooth function. When a call is
finished, it will automatically switch back to music play. It can also send music from
your phone to your car stereo wirelessly. You can enjoy music and answer calls in
handsfree mode without refitting your car, while ensuring driving safety.
2. Schematic Diagram of Appearance
3. Descriptions of the Schematic Diagram
1.
Volume up/down, / CH+ CH-‐
2.
Power indicator lamp
3.
Line output
4.
The frequency display / car battery voltage display / load current display
5.
Answer/redial/Play, Pause
6.
Microphone
7.
Hang up/CH Mode
8.
LED display window
9.
Power adaptor 12V-‐24V
10. Supports USB Play / Charging /Support two-‐way plug USB
10/11. Two USB,total output 5V / 2 .1A (maximum)
11. Charging with intelligent recognition /Support two-‐way plug USB
(it is recommended to charge the device, using this USB interface)
4. Product Features
1. Any angle adjustable, and suitable for all types of vehicles
2: FM transmitter
3: LED display window
4: Supports audio output
5: Battery voltage display / load current display
6: Music playback by USB disk
7: Supports MP3 music format
8: Answer/hang up/reject/redial the via Bluetooth
9: Bluetooth stereo music play
10: Call Echo Cancellation and Noise Reduction (CVC) technology
11: Dual USB output voltage, provides powers to other devices up to 5V/2.1A
12: Automatic memory function of power failure frequency point
13: Support USB charging intelligent recognition
14: Two
way plug USB
4.1 Connecting to your radio
Find a station on your radio where there is no commercial station being transmitted,
based on the preset stations on the
APBT200
. Go to 5.2.2 of this manual to adjust the
frequencies.
5. Operation Instructions
5.1 Bluetooth mode
5.1.1 Plug the product into cigarette lighter socket and switch the power to ON. The
product will start up and LED will display the frequency point once it is powered.
5.1.2 If your phone is connected to the
APBT200
for the first time, pairing is required.
5.1.3 Enable the Bluetooth function of your phone, turn the
APBT200
on and search
for “
APBT200
” device, which will display on your phone.
5.1.4 Select “
APBT200
” and pairing will be automatically done. A prompt sound will be
given after pairing.
5.1.5 Making a call
Dial a phone number using your phone and the audio will be played through the car
speakers.
5.1.6 Answering a call
If there is an incoming call press
key to answer the call. You can switch between
mobile phone microphone and the Bluetooth Car Chargers microphone when in a call
by pressing
key to switch between the mobile phone microphone and the product
microphone. Press
key to hang up.
5.1.7
Call back
Press
twice to call back the last number dialed.
5.1.8 Reject a call
You can reject a call by pressing the
key.
5.1.9 Playing music in your phone
This product supports A2DP function, which allows you to play music in your phone.
Music will be transmitted to your car audio via FM function of the product so that you
can enjoy music with higher quality. Press
key to play/pause and press
for the next/last song (note: some phones with lower system version may
not support this function).
5.2. USB playing mode
5.2.1 Plug the device into car cigarette lighter socket, the player detects songs inside
the USB drive and plays automatically. Press
buttons to play next or
previous songs, short press
to play / pause. Long press
button, digital
frequency flashes, short press
for FM frequency increase/decrease.
5.2.2
Adjust
the
A P B T 2 0 0
transmission frequency to
match
the frequency of the
cars
radio.
5.2.3 To adjust the transmission frequency: long press
to enter the selected
frequency , then the digital frequency flashes, short press "+" "-‐" key to scroll to
desired frequency.
Hold "+" "-‐" key to scroll through frequencies quickly. Frequency is adjustable within
1-.n
,_o
..,._,.___.
1::i
r
�
CH
