background image

In the event you wish to manually change the clock settings, please use the

instructions on the following page. 

3)

Choose Your Time Zone 

– You must set your time zone so the clock will display

accurate time once the atomic signal is received:

a. Select your time zone by repeatedly pressing the 

(

ARROW until you

see your time zone displayed on the LCD screen.

1)

Battery Installation 

– remove the battery compartment cover on the back of the

unit and install 2 FRESH “AA” batteries as shown here.

2)

Initial Setup 

– once the batteries are installed, the clock will power up.

The display will appear as follows:

The clock will begin searching for the Atomic signal

If the signal is AVAILABLE

– the clock will receive the local time in 3-5 minutes. 

The full strength signal indicator bars will appear on the display.

If the signal is NOT readily available 

– you can manually set the clock and calendar

(SEE MANUAL SETTING INSTRUCTIONS)
After the clock acquires the Atomic clock radio signal (this may take 24-48 hours) 
the time, date and daylight saving time changes will update automatically, giving you 
maintenance-free operation and perfect time precision.

BASIC SETUP

Time Zone will 

default to PST 

(Pacific Standard Time)

Signal Indicator 

will be flashing

Room Temp indicator 

will be flashing

PST

Pacific Standard

Time

MST

Mountain Standard 

Time

CST

Central Standard 

Time

EST

Eastern Standard

Time

HAST

Hawaii Aleutian 

Standard Time

AKST

Alaska Standard

Time

AST

Atlantic Standard

Time

Reviews: