background image

Connecting auxiliary 
device

Connect your auxiliary audio 
player (e.g. mp3 player) with an 
audio cable (not included) to the 
AUX IN jack on the left side of 
the unit.

Selecting AUX IN mode

• Press 

AUX ON/OFF

 on the 

back of the unit to select AUX 
IN mode.

• Press 

AUX ON/OFF

 again to 

exit from the AUX IN mode 
and resume to standby mode. 
To listen to the radio again,  
press  .

user 

manual

manual de usuario

EN/E

It is important to read this user manual prior to using your new product for the fi rst time.

Es importante leer este manual antes de usar por vez primera su equipo.

RP5415

RP5415PK

v5.0 (EN/E) 

PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE

IMPORTANT SAFETY INSTRUCTIONS

Before you begin

General controls

Clock

Sleep function

Audiovox Electronics Corp.

150 Marcus Blvd,

Hauppauge, NY 11788

©2009 Audiovox Electronics Corp.

Trademark(s) ® Registered

Marque(s) ® Deposée(s)

Marca(s) ® Registrada(s)

www.rcaaudiovideo.com

Printed in China

]

Plugging in for power

AC OUTLET POWER SUPPLY: 
120V~60Hz

The AC power plug is 
polarized (one blade is 
wider than the other) 
and only fi ts into AC 
power outlets one way.  
If the plug will not go into the 
outlet completely, turn the plug 
over and try to insert it the other 
way.  If it still does not fi t, contact 
a qualifi ed electrician to change 
the outlet, or use a different one.  
Do not attempt to bypass this 
safety feature.

Power is fed to the unit even 
when it is not functioning. To cut 
the power supply off, the power 
cable must be unplugged.

Front view

Top view

Radio

If you set Sleep function 
with low volume level 
before going to bed, we 
advise using Wake to alarm 
mode.

Battery back-up operation

The power failure protection 
circuit will not operate unless 
battery is installed.

When the battery backup 
functions, the digital display will 
not light, however, the wake 
function still occurs during the 
power interruption if remaining 
battery power is adequate.  

Normal operation will resume 
after AC power is restored so you 
will not have to reset the time or 
wake.

Install battery as follow:

1. Remove battery compartment 

door (located at the bottom of 
the radio) by applying thumb 
pressure to the tab on battery 
door and then lift the door 
out and off the cabinet.

2. Connect a 9-volt battery (not 

supplied) to the connector 
plug.

3. Replace the compartment door.

Power failure indicator

When AC power is interrupted 
(disconnected) for a short period 
of time, both time and alarm 
settings will change (unless 
battery is installed). After AC 
power is restored (reconnected), 
the Digital Display will blink 
to indicate that power was 
interrupted and you should 
readjust the time and alarm 
settings. 

 – turns on or off the radio; turns 

off the wake function

SLEEP

 – activates sleep function

SNOOZE

 – turns off the wake 

function temporarily; cancels the 
sleep function

DISPLAY

 – switches between 

analog and digital clock displays

Left view

TUNING

 – selects radio frequency

 

  – Slide to activate 

Wake 1 settings and change Wake 
1 mode:
•       (wake to alarm) – selects 

alarm as the waking mode

•       (wake to radio) – selects 

radio as the waking mode

• 

OFF

 – deactivates Wake 1 

waking mode

WAKE 1 CHECK TIME

 – checks 

the waking time for Wake 1

AUX IN

 – jack for external audio 

input

Right view

+ VOLUME

 

 – adjusts volume

 

  – Slide to activate 

Wake 2 settings and change Wake 
2 mode:
•       (wake to alarm) – selects 

alarm as the waking mode

•       (wake to radio) – selects 

radio as the waking mode

• 

OFF

 – deactivates Wake 2 

waking mode

WAKE 2 CHECK TIME

 – checks 

the waking time for Wake 2

Back view

BAND AM/FM

 – selects radio 

band

AUX ON/OFF

 – selects auxiliary 

input mode

       – adjusts Wake 2 time

       – adjusts clock time

       – adjusts Wake 1 time

– BRIG

 – adjusts display 

brightness

Display brightness

Clock time and radio frequency 
are displayed on the display area 
at the front of the unit. You 
can adjust the brightness of the 
display by rotating 

BRIGHTNESS 

on the back of the unit.

Setting clock

Turn the clock setting knob       on 
the back of the unit to adjust 
clock time. The time decrements 
or increments will follow by a 
faster rate when you turn and 
hold the knob. The digital clock 
shows and a clock icon fl ashes 
on the display while you are 
adjusting the time.

Selecting between 
analogue and digital clock

Press 

DISPLAY

 to select between 

analogue and digital clock display.

Switching on/off

Press   to turn on or off the radio.

Switching band

Slide the 

BAND AM/FM

 switch on 

the back of the unit to select FM 
or AM band.

Tuning radio

Turn the 

TUNING

 knob on the 

left of the unit to adjust radio 
frequency.

Antennas

AM Antenna

 – A built-in ferrite 

rod antenna eliminates the need 
for an outside antenna for AM 
reception.  Rotating the unit 
slightly may improve reception of 
distant AM stations.

FM Antenna

 – The power cord 

acts as your FM antenna.  The 
power cord picks up moderate 
to strong stations and eliminates 
the need for an external antenna 
in most strong signal areas.  Be 
sure the power cord is stretched 
out to its full length.  Do not 
coil or bunch the cord together.  

Changing position of the power 
cord may improve reception.

Built-In AFC 

– The Built In 

Automatic Frequency Control 
(AFC) works only on FM. It helps 
reducing drift on FM reception 
and keeping the radio locked in 
on the FM station to which it is 
tuned.

When tuning in FM stations, you 
may notice that the station you 
are tuning can be well-tuned on 
two or three nearby points on the 
dial. Always tune carefully at the 
loudest and clearest point.

Auxiliary input

Adjust the auxiliary 
device to mid-range 
volume and adjust the 
master volume by rotating 

VOLUME

 knob on the unit. 

Do not turn the volume of the 
auxiliary device too high as this 
may affect the sound quality. 
For other playback operations, 
control them on your auxiliary 
device. 

Wake function

Setting wake time

This unit allows two wake times 
to be set.
•  Turn the wake time setting 

knob       or       on the back 
of the unit to adjust wake 
time 1 and 2 respectively. 

•  The time decrements or 

increments will follow by a 
faster rate when you turn and 
hold the knob. 

•  “WAKE 1” or “WAKE 2” icon 

fl ashes on the display while 
you are adjusting respective 
wake time.

Selecting wake source

You may be woken up by radio 
or alarm.
1. Select an AM or FM station 

(see directions on “Radio”).

2. Set a wake time (see above 

direction).

3. Slide the switches on the sides 

of the unit to     /      (wake 
by alarm) or      /      (wake 
by radio). Corresponding icon 
lights on the front of the unit. 

            – Wake 1 by alarm
            – Wake 1 by radio
            – Wake 2 by alarm
            – Wake 2 by radio

Checking wake time

• Press 

WAKE 1 CHECK TIME

 

or 

WAKE 2 CHECK TIME

 on 

the sides of the unit to check 
respective wake time. Wake 
time shows briefl y on the 
display. 

•  “OFF” shows on the display 

if no wake source is selected 
while you are checking the 
wake time.

Turning off the wake 
alarm or radio

• Press 

SNOOZE 

on the top of 

the unit. The wake alarm or 
radio will be switched off 
temporarily. The alarm or 
radio will be on again when 
the snooze period is over. (see 
“SmartSnooze

TM

 Operation”) 

•  To turn off the wake alarm 

or radio completely, press   . 
The wake alarm or radio will 
activate again the next day 
unless you switch off the wake 
function (see “Switching off 
wake function”).

SmartSnooze

TM

 operation 

This operation allows extra sleep 
time after the wake function 
is on. The alarm will be off by 
pressing 

SNOOZE

SLEEP 

or 

DISPLAY

 until the snooze period 

is over. Snooze period can be 
set between 1 and 30 minutes 
(default: 9 min). 

Set the “quiet” period as follow:
1.  Press and hold 

SNOOZE

.

2.  Turn  the  clock  setting  knob        

on the back of the unit to 
adjust the snooze “quiet” 
period (default: 9 min). The 
time decrements or increments 
will follow by a faster rate 
when you turn and hold the 
knob. 

Switching off wake 
function

Slide the switches on the sides 
of the unit to

 OFF 

to switch off 

respective wake function. The set 
wake time will not be erased and 
can be used the next day when 
you switch on wake function 
again.

In sleep mode, you can set the 
duration (up to 2 hours) before 
the radio turn off automatically.

1.  Press and hold 

SLEEP 

and turn 

the clock setting knob      on 
the back of the unit to adjust 
the duration up to 2 hours. 
The time decrements or 
increments will follow by a 
faster rate when you turn and 
hold the knob. 

•  Note: The radio will be 

switched on.

2. To check the remaining 

duration before the radio turns 
off, press and hold 

SLEEP

.

3. To cancel the sleep function, 

press 

SNOOZE

 or  .   

Alkaline (NEDA 1604A/
IEC 6LR61) battery is 
recommended. Carbon-
zinc battery may be used but 
memory holding time will 
be substantially reduced. 
Memory holding time for 
a fresh alkaline battery is 
approximately 8 hours (if radio 
or alarm are not operated) 
which should take care of 
short, nuisance-type AC power 
failures. To preserve battery 
life, the unit should remain 
plugged into an AC outlet. 
As the battery gets older, its 
voltage drops and memory may 
be lost. Be sure to replace the 
battery periodically. Battery 
should be removed if the unit 
will be stored for more than 
one month. Leaky battery can 
badly damage the clock radio.  

12 Month Limited Warranty
Applies to RCA Audio/Video 
Products

• AUDIOVOX ELECTRONICS 

CORP. (the Company) warrants 
to the original retail purchaser 
of this product that should 
this product or any part 
thereof, under normal use and 
conditions, be proven defective 
in material or workmanship 
within 12 months from the 
date of original purchase, such 
defect(s) will be repaired or 
replaced with reconditioned 
product (at the Company’s 
option) without charge for 
parts and repair labor.

•  To obtain repair or 

replacement within the terms 
of this Warranty, the product 
is to be delivered with proof 
of warranty coverage (e.g. 
dated bill of sale), specifi cation 
of defect(s), transportation 
prepaid, to the Company at 
the address shown below.

•  This Warranty does not 

extend to the elimination 
of externally generated 
static or noise, to correction 
of antenna problems, loss/

interruptions of broadcast 
or internet service, to costs 
incurred for installation, 
removal or reinstallation of 
product, to corruptions caused 
by computer viruses, spyware 
or other malware, to loss of 
media, fi les, data or content, 
or to damage to tapes, discs, 
removable memory devices or 
cards, speakers, accessories, 
computers, computer 
peripherals, other media 
players, home networks or 
vehicle electrical systems.

•  This Warranty does not 

apply to any product or 
part thereof which, in the 
opinion of the Company, has 
suffered or been damaged 
through alteration, improper 
installation, mishandling, 
misuse, neglect, accident, or by 
removal or defacement of the 
factory serial number/bar code 
label(s). THE EXTENT OF THE 
COMPANY’S LIABILITY UNDER 
THIS WARRANTY IS LIMITED TO 
THE REPAIR OR REPLACEMENT 
PROVIDED ABOVE AND, 
IN NO EVENT, SHALL THE 
COMPANY’S LIABILITY EXCEED 

THE PURCHASE PRICE PAID 
BY PURCHASER FOR THE 
PRODUCT.

•  This Warranty is in lieu of 

all other express warranties 
or liabilities. ANY IMPLIED 
WARRANTIES, INCLUDING 
ANY IMPLIED WARRANTY 
OF MERCHANTABILITY, 
SHALL BE LIMITED TO THE 
DURATION OF THIS WRITTEN 
WARRANTY. ANY ACTION FOR 
BREACH OF ANY WARRANTY 
HEREUNDER INCLUDING ANY 
IMPLIED WARRANTY OF 
MERCHANTABILITY MUST BE 
BROUGHT WITHIN A PERIOD 
OF 24 MONTHS FROM DATE 
OF ORIGINAL PURCHASE. 
IN NO CASE SHALL THE 
COMPANY BE LIABLE FOR 
ANY CONSEQUENTIAL OR 
INCIDENTAL DAMAGES FOR 
BREACH OF THIS OR ANY 
OTHER WARRANTY. No person 
or representative is authorized 
to assume for the Company 
any liability other than 
expressed herein in connection 
with the sale of this product.

•  Some states do not allow 

limitations on how long an 

implied warranty lasts or the 
exclusion or limitation of 
incidental or consequential 
damage so the above 
limitations or exclusions 
may not apply to you. This 
Warranty gives you specifi c 
legal rights and you may also 
have other rights which vary 
from state to state.

How to make a warranty 
claim:

•  If your product is capable 

of storing content (such 
as an mp3 player, digital 
voice recorder, etc), it is 
recommended to make 
periodic backup copies of 
content stored on the product. 
If applicable, before shipping a 
product, make a back up copy 
of content or data stored on 
the device. Also, it is advisable 
to remove any personal 
content which you would not 
want exposed to others. IT IS 
LIKELY THAT CONTENTS AND 
DATA ON THE DEVICE WILL BE 
LOST DURING SERVICE AND 
REFORMATTING. AUDIOVOX 
ACCEPTS NO LIABILITY FOR 

LOST CONTENT OR DATA, OR 
FOR THE SECURITY OF ANY 
PERSONAL CONTENT OR DATA 
ON THE RETURNED DEVICE. 
Product will be returned 
with factory default settings, 
and without any pre-loaded 
content which may have been 
installed in the originally 
purchased products.  Consumer 
will be responsible for 
reloading data and content. 
Consumer will be responsible 
to restore any personal 
preference settings. 

•  Properly pack your unit. 

Include any remotes, memory 
cards, cables, etc. which were 
originally provided with the 
product. However DO NOT 
return any removable batteries, 
even if batteries were included 
with the original purchase. We 
recommend using the original 
carton and packing materials.

•  Include evidence of purchase 

date such as the bill of sale. 
Also print your name and 
address and a description of 
the defect. Send via standard 
UPS or its equivalent to:

 

Audiovox Electronics Corp.

  Attn: Service Department.
  150 Marcus Blvd.  
  Hauppauge N.Y. 11788

 1-877-833-3491
     
•  Insure your shipment for loss or 

damage. Audiovox accepts no 
liability in case of damage or 
loss en route to Audiovox.

•  Pay any charges billed to you by 

the Exchange Center for service 
not covered by the warranty.

•  A new or refurbished unit 

will be shipped to you freight 
prepaid.

What we will do:

Provide you with a new, or at our 
option, a refurbished unit. The 
exchange unit is under warranty 
for the remainder of the original 
product’s warranty period. 

For Canada Customers, please 
ship to:

Audiovox Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 16,
Mississuaga, Ontario
L5T 3A5

Warranty information

FCC information

This equipment has been tested 
and found to comply with the 
limits for a Class B digital device, 
pursuant to Part 15 of FCC Rules. 
These limits are designed to 
provide reasonable protection 
against harmful interference in 
a residential installation. This 
equipment generates, uses, and 
can radiate radio frequency 
energy and, if not installed 
and used in accordance with 
the instructions, may cause 
harmful interference to radio 
communications. 

However, there is no guarantee 
that interference will not occur 
in a particular installation. If 
this equipment does cause 
harmful interference to radio or 
television reception, which can 
be determined by turning the 

equipment off and on, the user is 
encouraged to try to correct the 
interference by one or more of 
the following measures:

•  Reorient or relocate the 

receiving antenna.

•  Increase the separation 

between the equipment and 
receiver.

•  Connect the equipment into 

an outlet on a circuit different 
from that to which the 
receiver is connected.

•  Consult the dealer or 

an experienced radio/TV 
technician for help.

Modifi cations not expressly 
approved by the party responsible 
for compliance could void the 
user’s authority to operate the 
equipment.

This Class B digital apparatus 
complies with Canadian ICES-003.
Cet appareil numérique de la 
classe B est conforme à la norme 
NMB-003 du Canada.

Manufacturer/Responsible 
Party

Audiovox Electronics Corp.,
150 Marcus Blvd., Hauppauge, NY 
11788

WARNING:

 

TO PREVENT FIRE 
OR ELECTRICAL 
SHOCK HAZARD, 
DO NOT EXPOSE 
THIS PRODUCT TO 
RAIN OR MOISTURE.

SEE MARKING ON BOTTOM OF PRODUCT

Some of the following 
information may not apply to 
your particular product; however, 
as with any electronic product, 
precautions should be observed 
during handling and use.
•  Read these instructions.
•  Keep these instructions.
•  Heed all warnings.
•  Follow all instructions.
•  Do not use this apparatus near 

water.

•  Clean only with dry cloth.
•  Do not block any ventilation 

openings. Install in accordance 
with the manufacturer’s 
instructions.

•  Do not install near any heat 

sources such as radiators, heat 
registers, stoves, or other 
apparatus (including amplifi ers) 
that produce heat.

•  Do not defeat the safety 

purpose of the polarized 
or grounding-type plug. A 
polarized plug has two blades 
with one wider than the 
other. A grounding type plug 
has two blades and a third 
grounding prong. The wide 
blade or the third prong is 
provided for your safety. If 

the provided plug does not 
fi t into your outlet, consult an 
electrician for replacement of 
the obsolete outlet.

•  Protect the power cord 

from being walked on or 
pinched particularly at plugs, 
convenience receptacles, and 
the point where they exit from 
the apparatus.

•  Only use attachments/

accessories specifi ed by the 
manufacturer.

•  Use only with the 

cart, stand, tripod, 
bracket, or table 
specifi ed by the 
manufacturer, 
or sold with the apparatus. 
When a cart is used, use 
caution when moving the cart/
apparatus combination to 
avoid injury from tip-over.

•  Unplug this apparatus during 

lightning storms or when 
unused for long periods of 
time.

•  Refer all servicing to qualifi ed 

service personnel. Servicing is 
required when the apparatus 
has been damaged in any way, 
such as power-supply cord or 

plug is damaged, liquid has 
been spilled or objects have 
fallen into the apparatus, the 
apparatus has been exposed 
to rain or moisture, does not 
operate normally, or has been 
dropped.

ADDITIONAL SAFETY 
INFORMATION

•  Main plug is used as 

disconnect device and it 
should remain readily operable 
during intended use.  In order 
to disconnect the apparatus 
from the mains completely, 
the mains plug should be 
disconnected form the mains 
socket outlet completely.

•  Apparatus shall not be exposed 

to dripping or splashing and 
no objects fi lled with liquids, 
such as vases, shall be placed 
on the apparatus.

•  Always leave suffi cient space 

around the product for 
ventilation. Do not place 
product in or on a bed, rug, 
in a bookcase or cabinet that 
may prevent air fl ow through 
vent openings.

•  Do not place lighted candles, 

cigarettes, cigars, etc. on the 
product.

•  Connect power cord only to 

AC power source as marked on 
the product.

•  Care should be taken so that 

objects do not fall into the 
product.

•  Do not attempt to disassemble 

the cabinet. This product 
does not contain customer 
serviceable components.

•  The marking information 

is located at the bottom of 
apparatus.

•  Caution marking is located at 

bottom of apparatus.

This is CLASS II apparatus 
with double insulation, 
and no protective earth 
provided.

Important Battery Precautions

•  Any battery may present a risk 

of fi re, explosion, or chemical 
burn if abused. Do not try to 
charge a battery that is not 
intended to be recharged, do 
not incinerate, and do not 
puncture.

• Non-rechargeable batteries, 

such as alkaline batteries, may 
leak if left in your product for 
a long period of time. Remove 
the batteries from the product 
if you are not going to use it 
for a month or more.

•  If your product usaes more 

than one battery, do not mix 
types and make sure they are 
inserted correctly. Mixing types 
or inserting incorrectly may 
cause them to leak.

•  Discard any leaky or deformed 

battery immediately. They 
may cause skin burns or other 
personal injury.

•  Please help to protect the 

environment by recycling 
or disposing of batteries 
according to federal, state, and 
local regulations.

•  Do not expose batteries to 

excessive heat (for example, 
by leaving them in sunlight or 
close to fi re).

For your records

In the event that service should 
be required, you may need the 
model number and the serial 
number.  In the space below, 
record the date and place of 
purchase and the serial number:
Model No.: 
Date of Purchase: 
Place of Purchase: 
Serial No.:

Technical information

Product: Clock Radio
Brand: RCA
Model: RP5415/RP5415PK
Power Supply: 120V ~ 60Hz
Power Consumption: 4 Watts

The descriptions and 
characteristics in this owner’s 
manual are for the purpose of 
general reference only and not as 
a guarantee. In order to provide 
you with the highest quality 
product, we may make changes 
or modifi cations without prior 
notice.

Reviews: