Rope Guide
Rope Wedge
Rope Grab
Rope Cover
The Ascender Positioning Point may
be removed by the user if desired but
can only be mounted by ActSafe or
an ActSafe approved service center.
ACTSAFE ACX POWER ASCENDER
QUICK START GUIDE
PLEASE NOTE: This document is a guide and must
only be used as an addition to the User Manual.
ActSafe Ascender operators must, before first use, have undergone training in the safe
use of the Ascender by either ActSafe Systems AB or by an ActSafe-approved training partner
or ActSafe distributor.
The ActSafe Ascender must be checked before every use by a Competent Person and must
undergo a minimum of one inspection per year by ActSafe Systems AB or an ActSafe-
authorised person. More frequent inspections may be required by your national regulations.
»
For any purpose other than that for
which it has been designed
»
In an explosive environment
»
If modified in any way by anyone
other than ActSafe Systems
»
After a free fall from a height of more
than 0.5 m (2 ft) or any other severe
impact onto a hard surface
»
If subjected to misuse in any way
so that parts or components might
have been damaged
»
The Ascender system should not be
exposed to high impact forces caused by
people orloads falling into the system
»
With any Battery other than original ActSafe
ACX Batteries
»
With any other battery charger than an
original ActSafe ACX Battery Charger
»
With a damaged or modified ActSafe
ACX Battery and/or ACX Charger
»
If the operator is unsure of how to use
the Ascender safely
»
If you are tired, ill, using prescription
medication that prevents you from using
machinery, or under the influence of alcohol
and/or drugs
»
Without having performed a pre-use check
A
