![background image](http://html1.mh-extra.com/html/access-security-products/rd-pn10/rd-pn10_manual_3663240001.webp)
RD-PN
10 - Standalone Access Controller and Reader
1
Description & Features
:
:
:
:
P10 is a waterproof standalone access control, reading EM&HID card, it uses advanced Microprocessor, with high-capacity flash memory for 10000
users. Users can be added and deleted via admin card, very simple to operate. The infrared remote control make the device not only have alarm,
protection, two units interlocked, anti-passback function but also can make two units interlocked, add and delete the user on the remote control key
directly. Besides, it has low power consumption design, anti-theft alarm, door release button etct, all these make it convenient, safe and reliable.
Feature
Description
Waterproof Design
Rainproof, moisture proof , durable
Ultralow power consumption
Longer working life, more stable performance
Large capacity
10000 card users
wiegand reader
Can used as wiegand 26 output reader
Connect external reader
Can connect EM/IC/HID wiegand 26 output reader
two units interlocked
two units can be interlocked online
Anti-passback
Single door or two doors anti-passback
2
Installation, wiring, diagram
•
Drill the holes
according to
the distance and the dimension on the back cover, or install the distributing box.
•
Thread the cable through the cable hole, connect
wires needed, wrapped Unused wires with insulating tape in case of short circuit
•
Fix the back cover on the wall with special screw
•
Fix the front cover to the back cover with the screws
Wiring
No.
Marks
Colour
Description
1
RESET
Pink
RESET
2
GND
Pink
RESET
3
D0
Green
Wiegand output D0
4
D1
White
Wiegand output D1
5
ALARM-
Gray
Alarm
6
OPEN
Yellow
Exit button
7
D_IN
Brown
Door contact switch
8
+12 - 24V
Red
+12 - 24V Input
9
GND
Black
GND
10
NO
Blue
Relay NO end
11
COM
Purple
Relay Com
12
NC
Orange
Relay NC end
Note
:
Please check all wires and install front cover carefully before power on.
ACCESS SECURITY PRODUCTS LTD