PAGE 1
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: CYC4560 CYCLONE KIT 31/05/13
ASSEMBLY INSTRUCTIONS
CYC4560 CYCLONE KIT
We thank you for choosing an Australian Made Shed. For further assistance please
visit our detailed instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be number ONE, so please let us
know what you think of our instructions. Feedback makes us better.
CYC4560 CYCLONE KIT - SUITABLE FOR
LARGE SIZE ABSCO SHEDS UP TO
3M X 4.5M
2.3M X 4.5M
3M X 6M
THE ADDITION OF THIS CYCLONE KIT WILL
INCREASE THE WIND STRENGTH OF YOUR
ABSCO SHED TO THESE CLASSIFICATIONS
W50C (C2) TO WITHSTAND WIND GUSTS OF
UP TO 180KLM/HOUR IF INSTALLED IN
ACCORDANCE WITH THIS ABSCO
ASSEMBLY INSTRUCTION.
WARNING: THE SHED MUST BE ANCHORED TO A 100mm THICK CONCRETE
SLAB AS DETAILED IN THIS INSTRUCTION WITH THE CONCRETE ANCHORS
SUPPLIED, OTHERWISE, EVEN AFTER THE ADDITION OF THE CYCLONE KIT,
THE SHED WILL NOT REACH THE STRUCTURAL ADEQUACY REQUIRED
DURING SEVERE STORMS OR A CYCLONIC EVENT.
WARNING: THE DOOR(S) MUST REMAIN CLOSED WITH ALL PADBOLTS
PROPERLY SECURED DURING SEVERE STORMS OR CYCLONIC EVENT.
READ THESE INSTRUCTIONS
CAREFULLY AND FULLY SO THAT
AN UNDERSTANDING OF THE STEPS
INVOLVED IN CONSTRUCTION IS
OBTAINED. DO THIS WITH
CONSTANT REFERENCE TO
ENGINEERING DRAWINGS
PROVIDED.
MEASURE AND CHECK OFF
ALL THE COMPONENTS PRIOR
TO COMMENCEMENT. IF A
DISCREPANCY IS DISCOVERED,
CONTACT ABSCO INDUSTRIES
IMMEDIATELY FOR ASSISTANCE
6.0m X 3.0m
UTILITY SHED
