background image

Ready To Build -

 

6ft Range

Pent Potting Shed 

Assembly Manual 

Pressure Treated 

Tanalised Timber

 for Longer Lasting Life!

Total Sheds

28 Charles Street, 

Willenhall, WV13 1HG

Tel: 01902 636 529 

Email: [email protected]

 

Version 1.2

Thank you for purchasing your Total Shed. 

All of our sheds are made from only the finest selected timber which are 

(Tanalised), specially pressure treated for a longer and lasting durable life 
span to the elements.

Each shed is carefully packed and delivered on a pallet 

ready to be assembled.

FEATURES NEW FLEXIBLE, 

INTER-CHANGEABLE DESIGN

FOR YOUR INDIVIDUAL STYLE.

DELIVERED FLAT PACKED IN 

EASY TO INSTALL SECTIONS

2 Persons Recommended for Assembling Shed

PLEASE NOTE: Use extreme caution when using any tools. Always wear safety gear where 

necessary. It is advisable that at least 2 or more persons assemble the shed for health and safety 

purposes.  We are not responsible for any injuries caused whilst assembling this shed.

Ready to Build Shed

www.totalsheds.co.uk

© Sheds (Midlands) Limited 2021

Includes 6x4ft to 6x20ft Instructions

Featured

 Build of the 

Pent Potting Shed 6ft x 8ft 

DRILL DRIVER

HAMMER

HAND SAW

STANLEY KNIFE

Tools Required:

Summary of Contents for Pent Potting Shed













Reviews: