ZyWALL 2WE
6
LABEL DESCRIPTION
RESET
You only need to use this button if you’ve forgotten the ZyWALL’s password. It returns
the ZyWALL to the factory defaults (password is 1234, LAN IP address 192.168.1.1,
terminal emulation settings as described above etc.; see your
User’s Guide
for details).
2.2 The Front Panel LEDs
The
PWR
LED turns on when you connect the power. The
SYS
LED blinks while performing
system testing and then stays on if the testing is successful. The
CON/AUX
,
LAN
, and
WAN
LEDs
turn on if the ports are properly connected.
LED
COLOR STATUS
MEANING
On
The ZyWALL is turned on.
PWR Green
Off
The ZyWALL is turned off.
SYS
Green Off
The ZyWALL is not ready or failed.
On
The ZyWALL is ready and running.
Flashing The ZyWALL is rebooting.
Red
On
The power to the ZyWALL is too low.
