ZyXEL Communications ZyXEL ZyAIR G-260, User Manual

Page: 39 / 82

ZyXEL G-260 User’s Guide
39 Chapter 3 ZyXEL Utility Configuration
3.2.2.2 WPA/WPA2
Figure 14 Security Settings: WPA/WPA2
The following table describes the labels in this screen.
Table 7 Security Settings: WPA/WPA2
LABEL DESCRIPTION
Authentication
Type
Select an authentication method from the drop down list. Options are TLS and
PEAP .
Login Name Enter a user name.
This is the user name that you or an administrator set up on a
WPA/WPA2 server.
Certificate This field is only available when you select TLS in the Authentication Type field.
Specify the location and name of a certificate in the Certificate field or click
Browse to locate it.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Password This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
Validate Server
Certificate
Select the check box to check the certificate of the authentication server.
PEAP Inner EAP This field is only available when you select PEAP in the Authentication Type
field.
Use the drop-down list box to select a PEAP protocol. Options are
MD5
CHALLENGE , TOKEN CARD and MS CHAP v2 .
Back Click to go back to the Encryption Type screen.
Next Click Next to confirm your selections and go to the Save screen. Section 3.2.3 on
page 41
Exit Click Exit to discard changes and return to the Site Survey screen.