ZyAIR B-1000 v.
2
Secure Wireless LAN Access Point
6
Table 1 ZyAIR Front Panel LED Description
LED COLOR
STATUS
DESCRIPTION
Blinking
The ZyAIR is not ready or rebooting.
Link
Red
Off
The ZyAIR has a successful reboot.
Blinking
(Breathing)
The ZyAIR is sending/receiving data through the wireless LAN.
ZyAIR
Blue
On
The ZyAIR is ready, but is not sending/receiving data.
On
The ZyAIR has a successful 10Mbps Ethernet connection.
Blinking
The ZyAIR is sending/receiving data.
Green
Off
The ZyAIR does not have a 10Mbps Ethernet connection.
On
The ZyAIR has a successful 100Mbps Ethernet connection.
Blinking
The ZyAIR is sending/receiving data.
ETHN
Orange
Off
The ZyAIR does not have a 100Mbps Ethernet connection.
On
The ZyAIR is receiving power.
PWR Green
Off
The ZyAIR is not receiving power.
To access the ZyAIR, configure your computer’s IP address and subnet mask to be in the same range as the
ZyAIR’s.
The default IP address of the ZyAIR is 192.168.1.2.
3 Set Up Your Computer’s IP Address
Skip this section if your computer’s IP address is already in the range of
192.168.1.3 ~ 192.168.1.254 with subnet mask 255.255.255.0.
Your computer must have a network card and TCP/IP installed. TCP/IP should already be installed on
computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems. Refer to the
Setting
Up Your Computer’s IP Address
appendix in the
User’s Guide
for other operating systems.
3.1 Windows 2000/NT/XP
1. In Windows XP, click
start
,
Control Panel
. In Windows 2000/NT, click
Start
,
Settings
,
Control Panel.
