ZyWALL 1 Internet Security Gateway
10
Macintosh
Installing TCP/IP Components
TCP/IP should already be installed on Macintosh OS 7 and later systems.
Configuring TCP/IP Properties
1.
Click the
Apple
icon (located in the upper left corner of your screen), select
Control Panels
and then
TCP/IP
.
2.
From the "
Connect Via
" box, select
Ethernet
.
3.
For dynamically assigned settings select
Using DHCP Server
from the
"
Configure
" box; for statically (manually) assigned settings see the
following:
a.
From the "
Configure
" box, select
Manually
.
b.
Enter your IP Address in the
IP Address
box.
c.
Enter your subnet mask in the
Subnet mask
box.
d.
Enter the IP address of your ZyWALL in the
Router address
box.
e.
To use a name server, enter its address in the
Name server address
box.
4.
Close the
TCP/IP Control Panel
.
5.
Click
Save
if prompted, to save changes to your configuration.
6.
Restart your computer, making sure that your ZyWALL is turned on first.
Verifying TCP/IP Properties for the Macintosh
After your Macintosh is configured and has restarted, go back to the
TCP/IP
Control Panel
. When using DHCP, the default TCP/IP values assigned by the
ZyWALL (shown earlier) are now displayed.
