ZyXEL Communications ZyWall Reference Manual Download Page 341

Page: 341 / 394

Chapter 39 Reports and Reboot

ZyWALL (ZLD) CLI Reference Guide

341

39.2 Email Daily Report Commands

The following table identifies the values used in some of these commands. Other input values
are discussed with the corresponding commands.

Use these commands to have the ZyWALL e-mail you system statistics every day. You must
use the

configure terminal

command to enter the configuration mode before you can use

these commands.

Table 191

Input Values for Email Daily Report Commands

LABEL

DESCRIPTION

e_mail

An e-mail address. You can use up to 80 alphanumeric characters, underscores
(_), periods (.), or dashes (-), and you must use the @ character.

Table 192

Email Daily Report Commands

COMMAND

DESCRIPTION

daily-report [no] activate

Turns daily e-mail reports on or off.

show daily-report status

Displays the e-mail daily report settings.

daily-report smtp-address {

hostname

}

Sets the SMTP mail server IP address or domain
name.

daily-report [no] smtp-auth activate

Enables or disables SMTP authentication.

daily-report smtp-auth username

username

password

password

Sets the username and password for SMTP
authentication.

daily-report no smtp-address

Resets the SMTP mail server configuration.

daily-report no smtp-auth username

Resets the authentication configuration.

daily-report mail-subject set

subject

Configures the subject of the report e-mails.

daily-report no mail-subject set

Clears the configured subject for the report e-
mails.

daily-report [no] mail-subject append system-

name

Determines whether the system name will be
appended to the subject of report mail.

daily-report [no] mail-subject append date-time

Determine whether the sending date-time will be
appended at subject of the report e-mails.

daily-report mail-from

e_mail

Sets the sender value of the report e-mails.

daily-report mail-to-1

e_mail

Sets to whom the ZyWALL sends the report e-
mails (up to five recipients).

daily-report mail-to-2

e_mail

See above.

daily-report mail-to-3

e_mail

See above.

daily-report mail-to-4

e_mail

See above.

daily-report mail-to-5

e_mail

See above.

daily-report [no] item cf-report

Determines whether or not content filtering
statistics are included in the report e-mails.

daily-report [no] item cpu-usage

Determines whether or not CPU usage statistics
are included in the report e-mails.

daily-report [no] item mem-usage

Determines whether or not memory usage
statistics are included in the report e-mails.

Summary of Contents for ZyWall











































































































































































































































































































































































































Search results

Summary of Contents for ZyWall

Reviews:

Related manuals for ZyWall

Brands by name

Popular brands

ZyXEL Communications ZyWall, Reference Manual

Search results

Summary of Contents for ZyWall

Reviews:

Related manuals for ZyWall

Brands by name

Popular brands