ZyXEL Communications ZyWall USG 50-H Series, User Manual

Page: 347 / 704

Chapter 20 SSL VPN
ZyWALL USG 50-H User’s Guide
347
Figure 257 VPN > SSL VPN > Global Setting
The following table describes the labels in this screen.
Table 130 VPN > SSL VPN > Global Setting
LABEL DESCRIPTION
Global Setting
Network
Extension Local
IP Specify the IP address of the ZyWALL (or a gateway device) for full tunnel mode
SSL VPN access.
Leave this field to the default settings unless it conflicts with another interface.
Message
Login Message Specify a message to display on the screen when a user logs in and an SSL VPN
connection is established successfully. You can enter up to 31 characters (“a-z”,
A-Z”, “0-9”) with spaces allowed.
Logout Message Specify a message to display on the screen when a user logs out and the SSL
VPN connection is terminated successfully. You can enter up to 31 characters (“a-
z”, A-Z”, “0-9”) with spaces allowed.
Update Client
Virtual Desktop
Logo You can upload a graphic logo to be displayed on the web browser on the remote
user computer. The ZyXEL company logo is the default logo.
Specify the location and file name of the logo graphic or click
Browse to locate it.
Note: The logo graphic must be GIF, JPG, or PNG format. The
graphic should use a resolution of 127 x 57 pixels to avoid
distortion when displayed. The ZyWALL automatically
resizes a graphic of a different resolution to 127 x 57 pixels.
The file size must be 100 kilobytes or less. Transparent
background is recommended.
Browse Click Browse to locate the graphic file on your computer.
Upload Click Upload to transfer the specified graphic file from your computer to the
ZyWALL.
Reset Logo to
Default Click Reset Logo to Default to display the ZyXEL company logo on the remote
user’s web browser.
Apply Click Apply to save the changes and/or start the logo file upload process.
Reset Click Reset to start configuring this screen again.