ZyXEL
– ZyWALL USG Support Notes
All contents copyright (c) 2010 ZyXEL Communications Corporation.
9
Step 8. Fill in the 3G connection parameters:
-
The card information will be detected by device automatically
-
ISP Settings
APN name
Dial String
-
PIN code
Step 9. After the configuration is done, click
Activate
to enable the rule. And
then click Connect button to enable the 3G connection.
Step 7. Go to the dashboard and click the
Dial
button to trigger the rule. User
can check the 3G WAN interface status to get the 3G modem detail
information.
Step 8. Now the both PPPoE and 3G connection are UP. Click on
Network >
WAN > General
page to select the
Active/Passive Mode
to achieve the
backup mechanism.