![background image](http://html1.mh-extra.com/html/zyxel-communications/zywall-usg-20/zywall-usg-20_user-manual_944412018.webp)
ZyXEL
– ZyWALL USG Support Notes
All contents copyright (c) 2010 ZyXEL Communications Corporation.
18
b.
Add WAN trunk for HTTP traffic — Set WAN2_ppp as Active mode,
while setting WAN1 as Passive mode.
c.
Use
SYSTEM_DEFAULT_WAN_TRUNK
to do load balancing for all other
traffic.
Step 2. Go to
Advanced > Policy Route
, add a policy route to route HTTP traffic
out primarily through WAN2, leaving WAN1 as backup.
Criteria:
IP Protocol:
TCP (6)
Application:
Custom
Source IP:
Choose interface LAN. Address range: 192.168.1.0~192.168.1.255
Source port:
Any
Destination IP:
Any
Destination Port:
80
Action Applies to:
Matched packets.
Routing Action:
Choose WAN interface WAN2, and enable
Use another interface when the
specified WAN interface is not available
.