ZyXEL Communications ZyAIR G-2000 Plus, User Manual

Page: 107 / 430

ZyAIR G-2000 Plus User’s Guide
Chapter 7 Wireless Security 106
Figure 38 Wireless: 802.1x and Dynamic WEP
The following table describes the labels in this screen.
Table 28 Wireless: 802.1x and Dynamic WEP
LABEL DESCRIPTION
ReAuthentication
Timer (in seconds)
Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds. The
default time interval is 1800 seconds (30 minutes).
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
Idle Timeout The ZyAIR automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed. The default time
interval is 3600 seconds (or 1 hour).
Dynamic WEP Key
Exchange
Select 64-bit WEP or 128-bit WEP to enable data encryption. Up to 32 stations
can access the ZyAIR when you configure dynamic WEP key exchange.This field
is not available when you set Security to WPA or WPA-PSK .