ZyXEL Communications XOHM MAX-206M2, User Manual

Page: 13 / 58

Your XOHM Modem 5
Your XOHM
Modem
Modem LED display (front panel)
1.
WiMAX LEDs:
The leftmost LED indicates WiMAX connectivity. A blinking LED
indicates that the unit is ranging, while a solid LED indicates that a connection has
been established and that the modem is ready to transmit and receive. The three
LEDs to the right indicate the signal strength of the reception (1-3). These LEDs
will be green when illuminated.
2.
Phone 1 / Phone 2 LEDs:
Illuminates when the VoIP “line” is in use. If no voice
accounts are configured, the LED will be off. If a voice account is configured and
registered, the LED will be green. When the connected phone is off-hook, the LED
will blink. When there is new voicemail on the account, the LED will be amber
(optional).
[Future service.]
3.
LAN 1 / LAN 2 LEDs: Illuminates when the modem is connected to the computers or
other networking devices. This LED will be green, and will flash as data is sent
through the connection.
Note Signal Strength LEDs: The number of signal strength LEDs illuminated reflects the strength
of the WiMAX signal being received by the XOHM Modem; however, the strength of signal
does not affect the speed of your connection. As long as there is sufficient signal strength to
make a connecton, you may achieve maximum connection speed.
Strength
Indicator WiMAX
Signal Phone 1 & 2 LAN 1 & 2 Power