Chapter 79 Networked AV Mode
XGS2220 Series User’s Guide
611
79.42 What You Can Do
• Use the
Restore Configuration
) to upload a stored device
configuration file.
• Use the
Backup Configuration
screen (
) to save your configuration for later
use.
• Use the
Save Configuration
screen (
) to save the current configuration
settings to a specific configuration file on the Switch.
• Use the
Firmware Upgrade
screen (
) to upload the latest firmware.
• Use the
Reboot System
screen (
) to restart the Switch without physically
turning the power off and load a specific configuration file.
• Use the
Tech-Support
screen (
) to create reports for customer support if
there are problems with the Switch.
79.43 Restore Configuration
Use this screen to restore a previously saved configuration file from your computer to the Switch.
Click
MAINTENANCE
>
Configuration
>
Restore
Configuration
to access this screen.
Figure 456
MAINTENANCE > Configuration > Restore Configuration
1
Click
Choose File
or
Browse
to locate the configuration file you wish to restore.
2
After you have specified the file, click
Restore
.
The Switch will run on the restored configuration after the restore process.
Figure 457
Configuration Restoring
79.44 Backup Configuration
Backing up your Switch configurations allows you to create various “snap shots” of your device from
which you may restore at a later date. Use this screen to back up your current Switch configuration to a
computer.
