Chapter 6 Wireless LAN
WAP3205 v3 User’s Guide
61
6.4.3 WPA PSK/ WPA 2- PSK
Click
Ne two rk
>
Wire le ss LA N
to display the
G e ne ra l
screen. Select
WPA - PSK
or
WPA 2- PSK
from the
Se c urity Mo d e
list.
Fig ure 37
Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
6.5 MA C Filte r
The MAC filter screen allows you to configure the WAP3205 v3 to give exclusive access to up to 16
devices (Allow) or exclude up to 16 devices from accessing the WAP3205 v3 (Deny). Every Ethernet
device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory
and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know
the MAC address of the devices to configure this screen.
To change your WAP3205 v3’s MAC filter settings, click
Ne two rk
>
Wire le ss LA N
>
MA C Filte r
. The screen
appears as shown.
Table 23 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK (AES)
LA BEL
DESC RIPTIO N
Security Mode
Choose
WPA- PSK
or
WPA 2- PSK
from the drop downli
Select
WPA- PSK/ WPA2- PSK
to have both WPA2 and WPA wireless clients be able to
communicate with the WAP3205 v3 even when the WAP3205 v3 is using WPA2-PSK.
Pre-Shared Key
WPA - PSK/ WPA 2- PSK
uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including spaces and
symbols).
Type a pre-shared key less than 64 case-sensitive HEX characters ("0-9", "A-F").
Apply
Click
A p p ly
to save your changes back to the WAP3205 v3.
Reset
Click
Re se t
to reload the previous configuration for this screen.
