![background image](http://html1.mh-extra.com/html/zyxel-communications/vop1372g-61/vop1372g-61_support-notes_943625022.webp)
22
H.248 (Basic setup)
MSC 192.168.168.88/24 1
Slot_2 SC 192.168.1.62/24 2
Interface 16 192.168.168.70/24 1
Master 1 192.168.1.62
Master 2 192.168.1.65
Slot_3 SC 192.168.1.65/24 2
Interface 16 Standby
Master 1 192.168.1.62
Master 2 192.168.1.65
Slot_5 MC 192.168.1.66/24 2
Master 1 192.168.1.62
Master 2 192.168.1.65
M
G
C
1
9
2
.1
6
8
.1
6
8
.3
2
Megaco
IES-5005
Group 2 3
Active
Standby
Interface slave
1 192.168.1.62
2 192.168.1.65
3 192.168.1.66
port h248 termination 2-1~24 term1 1
port h248 termination 3-* term49 1
port h248 termination 5-* term97 1
profile vo h248 set test 192.168.168.32
voip h248 interface mg set 16 MG1 test
voip h248 interface mg en 16
In order to achieve the scenario above, we need to do proper settings as follow
Step 1. Set ip address of MSC for inband management, disable switch isolation
ip set inband 192.168.168.88/24 1
switch isolation disable
Step 2.Configured the IP address and VID for each VOP card
vo ip set 2 192.168.1.62/24 2
vo ip set 3 192.168.1.65/24 2
vo ip set 5 192.168.1.66/24 2
Step 3. Set each VOP care to signal /media card
vo h248 opmode 2 sc (set slot 2 to signal card)
vo h248 opmode 3 sc (set slot 3 to signal card)
vo h248 opmode 5 mc (set slot 5 to media card)