Chapter 59 Logs
UAG CLI Reference Guide
305
59.1.2 System Log Commands
This table lists the commands for the system log settings.
59.1.2.1 System Log Command Examples
The following command displays the current status of the system log.
Table 193
logging Commands: System Log Settings
COMMAND
DESCRIPTION
show logging status system-log
Displays the current settings for the system log.
logging system-log category
module_name
{disable | level normal | level all}
Specifies what kind of information, if any, is logged in the system log and
debugging log for the specified category.
[no] logging system-log suppression
interval <10..600>
Sets the log consolidation interval for the system log. The
no
command
sets the interval to ten.
[no] logging system-log suppression
Enables log consolidation in the system log. The
no
command disables log
consolidation in the system log.
[no] connectivity-check continuous-log
activate
Has the UAG generate a log for each connectivity check. The
no
command
has the UAG only log the first connectivity check.
show connectivity-check continuous-log
status
Displays whether or not the UAG generates a log for each connectivity
check.
clear logging system-log buffer
Clears the system log.
Router# configure terminal
Router(config)# show logging status system-log
58 events logged
suppression active : yes
suppression interval: 10
category settings :
content-filter : normal , content-filter-forward: no ,
forward-web-sites : no , blocked-web-sites : normal ,
warning-web-sites : normal , user : normal ,
myZyXEL.com : normal , zysh : normal ,
bwm : normal , ike : normal ,
ipsec : normal , firewall : normal ,
sessions-limit : normal , policy-route : normal ,
built-in-service : normal , system : normal ,
system-monitoring : no , connectivity-check: normal ,
routing-protocol : normal , nat : normal ,
pki : normal , interface : normal ,
interface-statistics: no , account : normal ,
port-grouping : normal , ssl-vpn : normal ,
traffic-log : no , file-manage : normal ,
adp : normal , usb-storage : normal ,
daily-report : normal , ipmac-binding : normal ,
dhcp : normal , eps : normal ,
web-authentication: normal , smtp-redirect : normal ,
vpn-1-1-mapping : normal , default : all ,
Router(config)#
Summary of Contents for UAG Series
