Chapter 56 System
UAG CLI Reference Guide
278
56.7.1 Authentication Server Commands
The following table lists the authentication server commands you use to configure the UAG’s built-in
authentication server settings.
Table 177
Command Summary: Authentication Server
COMMAND
DESCRIPTION
[no] auth-server activate
Sets the UAG to act as an authentication server for other RADIUS
clients, such as APs. The
no
command sets the UAG to not act as an
authentication server for other APs.
auth-server authentication
auth_method
Specifies an authentication method used by the authentication
server.
no auth-server authentication
Resets the authentication method used by the authentication server
to the factory default (
default
).
[no] auth-server cert
certificate_name
Specifies a certificate used by the authentication server (UAG). The
no
command resets the certificate used by the authentication server
to the factory default (
default
).
certificate_name
: The name of the certificate. You can use up to
31 alphanumeric and ;‘~!@#$%^&()_+[]{}’,.=-
characters.
[no] auth-server trusted-client
profile_name
Creates a trusted RADIUS client profile. The
no
command deletes
the specified profile.
profile-name
: You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
[no] activate
Enables the client profile. The
no
command disables the profile.
[no] ip address
ip
subnet_mask
Sets the client’s IP address and subnet mask. The
no
command
clears this setting.
[no] secret
secret
Sets a password as the key to be shared between the UAG and the
client. The
no
command clears this setting.
[no] description
description
Sets the description for the profile. The
no
command clears this
setting.
description
: You can use alphanumeric and
()+/:=?!*#@$_%-
characters, and it can be up to 60 characters long.
show auth-server status
Displays the UAG’s authentication server settings.
show auth-server trusted-client
Displays all RADIUS client profile settings.
show auth-server trusted-client
profile_name
Displays the specified RADIUS client profile settings.
Summary of Contents for UAG Series
