4
1.
Attach the antennas and point them up.
2.
Do one of the following for your Internet connection:
a. DSL
: Use a telephone cable to connect your Device’s
DSL
port to a
telephone jack (or the DSL or modem jack on a splitter if you have one).
b. ETHERNET WAN
: If you already have a broadband router or modem, use
an Ethernet cable to connect the
ETHERNET WAN
port to it for Internet
access.
3. ETHERNET
: Use an Ethernet cable to connect a computer to an Ethernet
port for initial configuration and/or Internet access.
4. USB
: Connect a USB (version 2.0 or lower) memory stick or a USB hard
drive for file sharing. The Device automatically detects the USB device.
5. MOBILE
: Insert a 3G adapter to access the Internet wirelessly via a 3G
network. The Device uses this 3G WAN connection as a backup when the
DSL/Ethernet WAN connection fails.
6. POWER
: Use the provided power adaptor to connect the
POWER
socket to
an appropriate power source. Make sure the power at the outlet is on. After
connecting the power adaptor, look at the lights on the front panel.
• The
POWER
light blinks while your Device starts up and then stays on
once it is ready.
• Each
LAN
light stays on if the corresponding
Ethernet
port is properly
connected and blinks when there is traffic.
• The
ETHERNET
WAN
light stays on if the
ETHERNET
WAN
port is
properly connected and blinks when there is traffic.
• The
USB
light turns on when your Device detects a connected USB device
and blinks when there is traffic.
• The
MOBILE
light turns on when your Device detects a connected 3G
adapter and blinks when there is traffic.
Summary of Contents for SBG3300-N000
Page 12: ...12...
