ZyXEL
P-2000W Quick Start Guide
2
Connect the Phone to your Wireless Network
Turn on the phone by holding down the
Power/ End key
for two seconds. Powering on
can take from 30 seconds to two minutes.
After powering on, the LCD Screen may display
“Not
Registered”
, indicating the phone connected to your
network. In this case, please skip ahead to Section 4,
Setting Up GloConnect™ on your Phone
.
If the LCD Screen displays any other message, please
continue through the following steps.
From the main menu screen, press
Left Selector key
to enter the Menu options.
Scroll to
7.Wireless
using the
Down Arrow key
and
press the
Left Selector key
button again.
Select
1.Site Survey
with the
Left Selector key
.
Your device will now scan for all the available wireless
networks. The number next to the network names
indicates the signal strength percentage.
Find your wireless network name using the
Up and Down
Arrow keys
. If a
“W”
appears next to the network
name, or if you know WEP encryption is required for your
network, then skip to the next section,
Setting up WEP
on your Phone
. Otherwise, continue to the next step.
Page
8
