ZyXEL
P-2000W Quick Start Guide
Enter your wireless network WEP key through selecting
keypad modes and the keypad. You may need multiple
keypad presses to enter letters.
For example, to enter a
lowercase “b”, press the Down Arrow key
to select
lowercase mode, then press the “2” key twice.
You can
use the
Power/ End key
to remove typos.
When finished entering your WEP key, press the
Left
Selector key
to choose ‘OK.’ The phone will
display
“OK”.
Now that you have entered your WEP settings, press
the
Right Selector key
twice to save your new
settings. An hourglass will appear on the LCD Screen,
indicating your phone is saving the new settings. Your
phone will now reboot.
Once the phone reboots, it should connect to your
wireless network and obtain an IP address. This can
take from 30 seconds to two minutes. When finished,
if the LCD Screen displays
“Not Registered”
,
you
can now proceed to Section 4,
Setting Up
GloConnect™ on your Phone
. Otherwise, see the
next step.
If the screen displays
“Net failed”
with an error
code, please retry the steps in Sections 2 and 3.
Page
11
