ZyXEL Communications Prestige 941, User Manual, Page: 70 / 99

Prestige 941 Cable Router
System Maintenance
7-2
To get to the System Status, enter number 24 to go to Menu 24
–
System Maintenance. In this menu, enter
number
1
to open System Maintenance
–
Status. There are two commands in Menu 24.1
–
System
Maintenance
–
Status . Entering
9
resets the counters and
ESC
takes you back to the previous screen.
The next table describes the fields present in Menu 24.1 – System Maintenance – Status of your routing
cable model. It should be noted that these fields are READ-ONLY and are meant to be used for diagnostic
purposes.
NOTE: If you set your cable modem in Bridge mode you will see a different Status
screen.
Figure 7-2 Menu 24.1
–
System Maintenance – Status (Router Mode)
The following table describes the fields present in Menu 24.1
–
System Maintenance
–
Status .
Menu 24.1 - System Maintenance - Status
SYSTEM: PORT STATUS:
Name: CM ---- LAN ---- ---- CABLE ---
Up Time: 0:09:42 Status: 10M/Half Ready
IP Routing: Enable TxPackets: 33 10
ZyNOS V2.40(R25)b3 | 6/28/2000 RxPackets: 20 82
CPU Load: 9.37% Collision: 0 0
TxBytes/Sec: 0 0
CABLE MODEM: RxBytes/Sec: 0 7
Status: Operational Up Time: 0:09:33 0:09:33
Up Time: 0:09:13 DHCP: Server Client
IP Addr: 10.200.0.136 IP Addr: 192.168.1.1 10.201.0.231
IP Mask: 255.255.0.0 IP Mask: 255.255.255.0 255.255.0.0
MAC Addr: 00a0:c523:2233 MAC Addr: 00a0:c523:2231 00a0:c523:2232
DOWNSTREAM: +09.45 dBmV, 549,000,000 Hz (EIA-78), SNR=35.81 dB
UPSTREAM: +44.50 dBmV, 21,392,000 Hz
Press Command:
Commands: (9)-Reset Counters (Esc)-Exit