ZyXEL Communications Prestige 941, User Manual, Page: 33 / 99

Prestige 941 Cable Router
Hardware Installation and Initial Setup 2-11
Figure 2-7 Menu 1 – General Setup
Table 2-4 General Setup Menu Field
FIELD DESCRIPTION EXAMPLE
System Name
Choose a descriptive name for identification purposes. This name can
be up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes “–” and underscores "_" are accepted.
P941
Domain Name Enter the domain name. Domain
IP Routing Set operation mode as Router mode (Enable) or Bridge mode (Disable).
Enable
(default)
Channel Scan
Table This table defines the channel for scanning prior to normal downstream
frequency scanning. Five bands are implemented.
Channel plan
The channel plan can be
EIA: EIA-542 Cable Television Channel Identification Plan.
HRC: Harmonic-Related Carrier Frequency Plan.
B/G (CCIR): Europe Standard B + G Frequency Plan
OIRT: OIRT Standard D Frequency Plan
EURO: 250 kHz incremental Non-Standard Frequency Plan
Disable: no predefined channel band.
EIA
Channel
start/end The channel start and the channel end define the range of the scanning
channels.
Channel override The user can use this field to set the current downstream channel.
Menu 1 - General Setup
System Name=
Domain Name=
IP Routing= Enable
Channel Scan Table:
channel plan channel start channel end
-------------- ------------- -------------
1. EIA 67 70
2. EIA 85 88
3. Disable N/A N/A
4. Disable N/A N/A
5. Disable N/A N/A
Channel Override:
Channel plan= EIA Channel number= 78
Press ENTER to Confirm or ESC to Cancel: