ZyXEL Communications Prestige 661H Series, User Manual

Page: 401 / 547

Prestige 661H/HW Series User’s Guide
401 Chapter 42 VPN/IPSec Setup
Figure 261 Menu 27.1 IPSec Summary
Menu 27.1 – IPSec Summary
# Name A Local Addr Start - Addr End / Mask Encap IPSec Algorithm
Key Mgt Remote Addr Start - Addr End / Mask Secure GW Addr
- ------ - ----------------- --------------- ------ ------------------
001 Taiwan Y 192.168.1.35 192.168.1.38 Tunnel ESP AES MD5
IKE 172.16.2.40 172.16.2.46 193.81.13.2
002 zw50 N 1.1.1.1 1.1.1.1 Tunnel AH SHA1
IKE 4.4.4.4 255.255.0.0 zw50test.zyxel.
003 China N 192.168.1.40 192.168.1.42 Tunnel ESP DES MD5
IKE N/A N/A 0.0.0.0
004
005
Select Command= None Select Rule= N/A
Press ENTER to Confirm or ESC to Cancel:
Table 137 Menu 27.1 IPSec Summary
FIELD DESCRIPTION
# This is the VPN policy index number.
Name This field displays the unique identification name for this VPN rule. The name may be up
to 32 characters long but only 10 characters will be displayed here.
A Y signifies that this VPN rule is active.
Local Addr
Start
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Single , this is a
static IP address on the LAN behind your Prestige.
When the
Addr Type field in Menu 27.1.1 IPSec Setup is configured to Range , this is
the beginning (static) IP address, in a range of computers on the LAN behind your
Prestige.
When the
Addr Type field in Menu 27.1.1 IPSec Setup is configured to SUBNET , this
is a static IP address on the LAN behind your Prestige.
Addr End /
Mask
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Single , this is
the same (static) IP address as in the Local Addr Start field.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Range , this is
the end (static) IP address, in a range of computers on the LAN behind your Prestige.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to SUBNET , this
is a subnet mask on the LAN behind your Prestige.
Encap This field displays Tunnel mode or Transport mode. See earlier for a discussion of
these. You need to finish configuring the VPN policy in menu 27.1.1.1 or 27.1.1.2 if ???
is displayed.