Prestige 623R-A1 ADSL Dual-link Router
8
Step 11.
For Windows 2000: When a
Digital Signature Not Found
warning screen displays, click
Yes
to continue.
For Windows XP: When a
Hardware Installation
warning screen displays as shown, click
Continue Anyway
.
Step 12.
Click
Finish
and restart the computer when prompted to complete the installation.
Verifying Your USB Installation
When your computer finishes rebooting, check the status
of the Prestige in the
Device Manager
window. Click
Start
,
Settings
,
Control Panel
,
System
,
Hardware
and
then click
Device Manager
. (Steps may vary depending
on the version of Windows).
Verify the status of the Prestige under
Network Adapter
.
Check that there is no question mark on the device icon
for the Prestige.
Setting Up Your Computer’s IP Address
Skip this section if your computer is already set up to accept a dynamic IP
address. This is the default for most new computers.
The Prestige is already set up to assign your computer an IP address. Use this section to set up your
computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range
with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with
your Prestige.
