ZyXEL Communications Prestige 623ME-T, User Manual

Page: 136 / 253

Prestige 623ME-T User’s Guide
17-2 NAT
The following figure shows how you apply NAT to the remote node in menu 11.1.
Figure 17-2 Menu 11.3 Applying NAT to the Remote Node
Step 1. Enter 11 from the main menu.
Step 2. When menu 11 appears, as shown in the following figure, type the number of the remote node
that you want to configure.
Step 3. Move the cursor to the Edit IP/Bridge field, press [SPACE BAR] to select Yes and then press
[ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.
Select None to disable NAT or SUA Only to enable the Address Mapping Set of
menu 15.2.
Menu 11.3 - Remote Node Network Layer Options
IP Options: Bridge Options:
IP Address Assignment = Dynamic Ethernet Addr Timeout(min)= N/A
Rem IP Addr = 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= N/A
NAT= SUA Only
Address Mapping Set= N/A
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies=
Enter here to CONFIRM or ESC to CANCEL: