ZyXEL Communications Prestige 623ME-T, User Manual

Page: 116 / 253

Prestige 623ME-T User’s Guide
14-4 Remote Node Configuration
Table 14-1 Menu 11.1 Remote Node Profile
FIELD DESCRIPTION EXAMPLE
Rem Login Type the login name that this remote node will use to call your
Prestige. The login name and the Rem Password will be used to
authenticate this node.
Rem Password Type the password used when this remote node calls your Prestige.
Outgoing:
My Login Type the login name assigned by your ISP when the Prestige calls
this remote node.
My Password Type the password assigned by your ISP when the Prestige calls this
remote node.
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP / PAP – Your Prestige will accept either CHAP or PAP when
requested by this remote node.
CHAP – accept CHAP (Challenge Handshake Authentication
Protocol) only.
Authen
PAP – accept PAP (Password Authentication Protocol) only.
Route
This field determines the protocol used in routing. Options are IP and
None.
IP
Bridge When bridging is enabled, your Prestige will forward any packet that
it does not route to this remote node; otherwise, the packets are
discarded. Select
Yes to enable and No to disable.
No
Edit IP/Bridge Press [SPACE BAR] to select Yes and press [ENTER] to display
Menu 11.3 – Remote Node Network Layer Options .
No
Edit ATM Options Press [SPACE BAR] to select Yes and press [ENTER] to display
Menu 11.6 – Remote Node ATM Layer Options .
No
Telco Option
Allocated Budget
(min)
This sets a ceiling for outgoing call time for this remote node. The
default for this field is 0 meaning no budget control.
Period (hr) This field is the time period that the budget should be reset. For
example, if we are allowed to call this remote node for a maximum of
10 minutes every hour, then the
Allocated Budget is (10 minutes)
and the Period (hr) is 1 (hour).