manualshive.com logo in svg

ZyXEL Communications Prestige 2802HW(L)-IX, Support Notes, Page: 95 / 187

Share
Download
ZyXEL Communications Prestige 2802HW(L)-IX Support Notes Download Page 95

 

 

Prestige 2802HW(L)-Ix Support Notes 

 
 

 

All contents copyright (c) 2007 ZyXEL Communications Corporation.   

95

1.

 

The P2802HWL includes a DSL cable and a RJ-11 cable. Connect the DSL cable to the DSL 

port and connect RJ-11 to Lifeline port. 

2.

 

Connect the RJ11 to the splitter phone jack or a telephone wall jack 

3.

 

Connect the DSL cable to the splitter modem jack or ADSL line 

4.

 

Connect the splitter jack where it label Line to ADSL line from the ISP.   

 

Figure 2 Splitterless type 

1.

 

The P2802HWL includes a DSL cable and a RJ-11 cable. Connect the DSL cable to the DSL 

port and connect RJ-11 to Lifeline port. 

2.

 

You need to obtain a regular PSTN Y connector from regular phone shop. 

3.

 

Connect the RJ-11 to one of the output jack on the Y connector 

4.

 

Connect the DSL cable to the other output jacket on the Y connector 

5.

 

Connect the Y connector input port with a phone cable to the wall Jack or line from ISP.   

 

 

Summary of Contents for Prestige 2802HW(L)-IX




























































































































































































Reviews:

No comments