Prestige 2802HW(L)-Ix Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
23
different types. The Prestige supports NAT sets on a remote node basis. They are reusable, but only one set is
allowed for each remote node. The Prestige 2802HWL supports 8 sets since there are 8 remote node. The
default SUA (Read Only) Set is a convenient, pre-configured, read only, Many-to-One mapping set, sufficient
for most purposes and helpful to people already familiar with SUA in previous ZyNOS versions.
•
WEB GUI Menus
1. Applying NAT in the WEB GUI
You apply NAT via WEB GUI “Network>NAT>General＂ as displayed next. The next figure that you could
apply NAT for Internet access –
Full Feature
.
The following table describes the options for Network Address Translation.
Field
Options
Description
Full Feature
When you select this option the SMT will use Address
Mapping Set 1 (Menu 15.1-see later for further
discussion).
None
NAT is disabled when you select this option.
Network Address Translation
SUA Only
When you select this option the SMT will use Address
Mapping Set 255 (Menu 15.1-see later for further
discussion). This option use basically Many-to-One
Overload mapping. Select
Full Feature
when you
require other mapping types.
It is a convenient,