Prestige 2602HWL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
151
phone calls to PSTN network if the DSL line is unplugged or SIP account cannot be registered, or
relay outgoing calls to IP network when PSTN line is unplugged.
You may set up
Call Fallback
easily on web GUI:
VoIP > Phone > Common
Call Park / Call Pickup
Call Park/Pickup function allows you to place a call on hold first. Then it can be retrieved from
another phone in the system.
For example, if you are on an active call at your phone, you can park the call by press *97# +
park number. Someone on another phone in the system can then dial the call park number to
pick-up the call.
Note:
The caller must still pay while the call is parked.
When you park the call, you enter a number of your choice (Up to eight digits), which you must
enter again when you pick up the call. If you do not enter the correct number, you cannot pickup
the call. This means that only someone who knows the number you have chosen can pick up the
call.
You can have more than one call on hold at the same time, but you must give each call a different
number.
This example shows you how to configure the Call Park and Call Pickup