Chapter 3 The ENCRYPT Button
PLA4225 User’s Guide
24
For example, you have already set up a powerline network in your home (A) which accesses a
printer (B). Now you want a separate powerline network connection from your laptop to your
printer (C).
Figure 9
One Existing Powerline Network
1
Click the ENCRYPT button on (A) for more than 10 seconds until the power (
) light flashes. This
disconnects (A) from (B).
2
Click the ENCRYPT button on (A) and (C) for 1~2 seconds and within two minutes of each other.
3
Wait for about one minute while (A) and (C) connect.
4
Check the LEDs on both (A) and (C). When the power (
) and HomePlug (
) lights stop blinking
and the power (
) light shines steadily, the devices are connected.
Figure 10
Two Separate Powerline Networks
Congratulations. You now have two separate powerline networks as shown above.
A
B
C
A
C
B
Summary of Contents for PLA4225
