Rear Panel Connections
PORT
CONNECTION
CABLE
Connect the F-type connector to the CATV outlet using a
coaxial cable.
POWER
Connect the external power adaptor to the P964 APR and
plug it into an appropriate power outlet.
TO a COMPUTER
TO a HUB
LAN1~LAN4 Straight-through/Crossover
Ethernet cable
Straight-through/Crossover
Ethernet cable
WLAN IEEE
802.11g/b
-
USB USB
cable -
Before You Start
The P964 APR is a broadband cable CPE with dual modem/router operation mode. In
order to use your P964 APR, you need to establish an internet access account with your
local cable operator.
1.
A cable Internet service that supports two-way cable modem access.
2.
A coaxial cable line which has been prepared for cable modem service by your ISP
or cable operator.
3.
The P964 APR’s Media Access Control (MAC) address is labeled on the bar code
sticker. The MAC address consists of 12 characters preceded by the text “HFC
MAC:”.
Use the HFC MAC address for registering with your cable operator.
4.
The IP address(es) of the Domain Name System server(s) is supplied by your ISP.
5.
The P964 APR is configured as a router with NAT and DHCP enabled and with
following factory default.
LAN IP Address
192.168.1.1
Subnet Mask
255.255.255.0
DHCP IP Pool
192.168.1.33 – 192.168.1.64
Web username
webadmin
Web password
1234
Note: The default might be different from different cable operators. Please
consult with your cable Internet service provider for any change.