ZyXEL Communications P2602IAD, Tutorial, Page: 5 / 12

The utility can also be opened from the Program manager (Zyxel – Setup Device).
The first screen will give you an overview of what information will be required.
Click on “Continue” to proceed
Once the Setup Utility connects to the ADSL router then the user can configure his VPN connection
settings. The user can do this by simply adding the VPN Lite username and password that was
configured on the VPN Lite administrator Website. Please note that the username includes the realm
name as seen in the figure below. The user must also add the LAN IP Address and subnet mask also as
configured on the VPN Lite Webpage. The DHCP server on the ADSL router will use this range to
dynamically push down IP addresses in this range. The IP address must be given in a classless CIDR
format (“IP Address” / “Subnet-mask”) as seen on the VPN Lite Management Webpage (e.g
10.0.14.0/24).
Note that the IP Address for each site must fall in a different subnet.
Example:
site1@evpn.lite.0001 can be 10.0.1.0/24, and the subnet for site2@evpn.lite.0002 must be a
different subnet, 10.0.2.0/24. The IP Address must correspond exactly to the one configured on the
VPN Lite Management page.
If the user does not have an Internet account at this site then the Internet configuration block can be left
out. If this is the case, the Internet account will be set to login to guest@telkomadsl which will only
allow access to the
www.telkom.co.za website, thus allowing the network administrator to use the VPN
Lite management without having to login to the Internet.