5
P-870M-Ix v2 Series User’s Guide
3 Wall-mounting Instructions
Complete the following steps to hang the P-870M-Ix v2 on a
wall.
1
Select a position free of obstructions on a sturdy wall.
2
Drill two holes for the screws (M3*10). The centers of the
holes should be 120 mm apart.
Note:
Be careful to avoid damaging pipes or cables
located inside the wall when drilling holes for the
screws.
3
Do not screw the screws all the way into the wall. Leave a
small gap of about 0.5 cm between the heads of the
screws and the wall.
4
Make sure the screws are snugly fastened to the wall.
They need to hold the weight of the P-870M-Ix v2 with the
connection cables.
5
Align the holes on the back of the P-870M-Ix v2 with the
screws on the wall. Hang the P-870M-Ix v2 on the screws.
DSL
Green
The P-870M-Ix v2 has a DSL connection.
Blinking
The P-870M-Ix v2 is trying to establish a
DSL connection.
Off
The DSL line is down.
Light
Status
Description
